POSITION: Home -> Products -> Long-distance Alarm -> Long distance PSTN alarm system (Compatible with CMS)
|Product Name: Long distance PSTN alarm system (Compatible with CMS)
|| Long distance PSTN alarm system (Compatible with CMS)
1.Defence zone LCD Display:Compact design, orange backlight, night vision, big LCD Screen, 99 zones display.
2. Anti-tampering function:When the panel was destroy, it will emit a high piched voice alert and auto dial the preset phone numbers at the same times.
3.Learning code: It can work with different sensors and the user can easily add and remove the sensors
4.Compatible with wired and wireless sensors: The panel has 99 wireless zones, 2 wired zones and 2 connection port for Electronic Board . It can use with sensors like PIR Motion Sensor, IR Beams, Smoke Detector, Gas Detector, Panic Buttons and so on.
5.Immediate Spot Alarm: The panel has built-in siren and also can work with external siren. When alarm, the siren can be switch automatically.
6.Look up logs/query records :100 Logs recording with time display. One group of time arm/disarm
7. Low-power alert Function: Once the backup lithium battery is in low power state or AC power has been cut, the panel will send SMS to alert the user. If the system was use with Central Monitoring Station, the panel will also send this message to the Central Monitoring Station
8. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there are voice instruction for some important operation.
9.Remote control:If the system do not alarm, the user can remote control the system to arm/disarm on phone after inputing correct password.
10.Back-up lithium battery: When the AC power is cut, the system can continue to work because it will turn on and charge the backup lithium battery automatically.
11.Our terminals communicate with CMS by GPRS, with these two parts, owner can provide service to community. And the TTS Voice Module will alert the user which zone and which sensor alarm
12. Ready to arm function: When you want to arm the system while the door or window does not close well, the panel will make continious DI Alert to remind you that the window or door has not been close well.
13. Self-checking function: The alarm panel has the self-checking function, so does the sensors. Then the panel and the sensor will combine together for self-checking. When the sensor was self-checking, it will automatically record the working state and power condition, then it will send signal to the panel, after that the panel will send regular report to the central monitoring station to check that whether the system was in normal condition.
14.Door Chime Function: In disarm state, when someone come in, the system will make DI Alert.
15.Listen-in Function: After input correct password, the owner can hear the spot voice clearly. And the user can remotely prolong or cut listen-in on phone. What¡äs more the user can disarm the system during listen in.
16.On the remote controller, the user can arm/disarm the system and do emergency calling. It is very convinient for the user.
17. With wired siren connection port, can set sound/mute Alarm
18.When alarm, the system will automatically send message to central monitoring station and dial the the preset phone numbers. Once the alarm phone has been connected, the user can remotely arm/disarm the system on phone.
19.Intelligent control system to check that whether the user has handled and confirmed the alarm. After confirmed, the system will not dial the pone numbers.
20.DC/AC power auto switch: charging by AC power , switch to DC power if AC power cut to make system no fail. the whole system can be used to prevented against burglar,robber,fire,etc.
21.Compatible with SSG Wireless Doorway Keypad.
22.Can use with flash siren ( to arm/disarm synchronously with the panel)
23.The LCD use the global hieroglyph which can be recognise by people form different countries24.Can use with the electronic board to indicate the arm/disarm/alarm state to deterrent the intruder
25.Time Arm/Disarm automatically.
|1.The Dimension of the Plastic Shell: 34*25*7.3CM.|
2.Power Adaptor: AC To DV conventor.
Input: AC 220( AC 110V/240V is optional,
3. Standby Current: ≤20mA Alarm State Current: ≤200mA.
4. Working Condition: Indoor, temperature: -10 ~ 50 degree, Relative humidity;≤90% atmospheric pressure: 86 ~106Kpa
5. Alarm Receiving Mode: AM and FM. .AM Receiving Distance:≥120M (In the open area)
FM Receiving Distance: ≥1800M (In the open area)
6. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there are voice instruction for some important operation.7. Preset Phone Numbers: 6 Group (Maximum 30 digits for each group)8. External Siren: ≥110dB Built-in Siren: ≥85dB
9. Frequency: 315MHz/433MHz.
10. Dual voice frequency dialing with single frequency current:
circle current 80mA 35mA 18mA ,
high frequency -7dBM+3dB-7dBM-5dB -7dBM+-3dB -7dBM+5dB-7dBM3dB , low frequency -9dBM+3dB-9dBM-5dB -9dBM+-3dB -9dBM+5dB-9dBM-3dB8 , high-low frequency gap: 2+-1dB , frequency gap: <+-1.5%
11. Protocol for CMS:Contact ID
Introduction about antennas
FM outdoor high power, high sensitivity antenna.: SA-FMTX01
Configuration: 1 antenna with 30 meters long signal wire. The transmitting distance between all SSG FM alarm control panels and alarm accessories can reach to 1500 meters long in open air with no obstacle. While the reality is that there are always some obstacles surrounding control panel, like house, tree and so on. So the transmitting distance in this situation will be shortened to 500 meters. In order to overcome the limit of transmitting distance, you can use SA-FMTX01 with the control panel. Notice: please install this antenna outside, it should be stalled as high as possible. So the transmitting distance can reach as far as 1800 meters, even there are some obstacles surrounding the control panel. Of course, this parameter is not accurate 100%, after all some situations are really complicated. So what we suggest is installing the control panel correctly, Less obstacles, longer distance.
Notice: This antenna can work with all FM alarm systems from SSG. Its signal transmitting distance can reach to as far as 1.8 killo meters.
Model: Super gain FM antenna, SA-FMTX02
Configuration: 1 antenna with 20 meters long signal wire. Compared with SA-FMTX01, this antenna get a more sensitive signal, the signal covering can reach to more than 2000 meters with obstacle surrounding, more than 3 killo meters in open air.
Notice: please install this antenna outside, it should be stalled as high as possible. So the transmitting distance can reach as far as 2000 meters, even there are some obstacles surrounding the control panel. Of course, this parameter is not accurate 100%, after all some situations are really complicated. So what we suggest is installing the control panel correctly, Less obstacles, longer distance.
Notice: This antenna can work with all FM alarm systems from SSG. Its signal transmitting distance can reach to as far as 2.5 killo meters.
Because this antenna shell is made from glass, its height is 4 meters, so it is convenient for us to deliver, we don¡ät recommend you to use it. Normally, this antenna is suitable to some special places like prison, farm, villa community and so on. The best way to ship it is by sea.